@article { author = {Behrooz, Bagher and Delbari, Abolfazl and FayyazMohammadi, Mohammad}, title = {Modeling Oil Pollution Dissemination in Different Areas of Arvandroud River, Iran}, journal = {Environmental Researches}, volume = {12}, number = {23}, pages = {185-198}, year = {2021}, publisher = {}, issn = {2008-9597}, eissn = {2008-9590}, doi = {}, abstract = {Oil silt dissemination occurs in aquatic environments owing to chemical, physical, and biological processes that depend on the oil, hydrodynamic, meteorological, and environmental properties. Oil silts are disseminated because of currents, waves, and wind effects. The extant study was conducted on Arvandroud due to the existence of Abadan Oil Refinery, and ports of Abadan, Khorramshahr, and Basrah. To do so, MIKE 21 model was employed. This numerical model was developed based on the Eulerian method, in which the continuity and momentum equations (in-depth averaged Navier–Stokes equations) were employed. After the calibration step, the model results were compared with the field measurements, and findings indicated an accurate model prediction of water surface fluctuations, current speed and direction. Hydrodynamic module output was applied to the oil spill's analysis module to simulate the oil dissemination pattern. The oil spill's analysis module employed Lagrangian particles to anticipate the concentration and thickness of oil silt. In the next step, three spatial scenarios were designed and implemented to find the effect of the aforementioned environmental factors on oil pollution dissemination. According to the results of modeling, if pollution occurs at the beginning of tides for three hours in front of Abadan Oil Refinery and Khosrowabad, while the average debit (discharge) of river equals 480m3/s, pollution reaches the Persian Gulf after 124 and 85.5 hours, respectively.}, keywords = {Arvandroud,Tide,Mike 21 Hydrodynamic Model,Oil Pollution Dissemination}, title_fa = {مدل‌سازی انتشار آلودگی نفتی در مکان‌های مختلف رودخانه اروندرود – ایران}, abstract_fa = {انتقال و پخش لکه نفتی در محیط‌های آبی به دلیل فرآیندهای شیمیایی، فیزیکی و زیست‌شناسی است که خود وابسته به خصوصیات نفت، هیدرودینامیک، هواشناسی و شرایط محیط‌زیستی است. پخش و انتقال لکه‌های نفتی به دلیل جریان، امواج، اثر باد است. این تحقیق بر پایه وجود پالایشگاه نفت آبادان، وجود بنادر آبادان، خرمشهر و بصره در منطقه اروندرود صورت گرفته است. برای این منظور از مدل مایک 21 استفاده شده است. این مدل عددی بر پایه روش اویلری توسعه داده شد و در آن برای مشخص کردن الگوی حرکت جریان آب از معادلات پیوستگی و تکانه (معادلات ناویر استوکس متوسط گیری شده در عمق) استفاده شده است. پس از واسنجی، مقایسه‌ی نتایج مدل با اندازه‌گیری‌های میدانی نشان می‌دهد مدل دارای دقت قابل قبولی در پیش‌بینی نوسان سطح آب، جهت و سرعت جریان دارد. جهت شبیه‌سازی الگوی انتشار نفت، خروجی ماژول هیدرودینامیک به ماژول تحلیل نشت نفت اعمال شده است. ماژول تحلیل نشت نفت از روش لاگرانژی ذرات برای پیش‌بینی غلظت و ضخامت لکه نفتی استفاده می‌کند. سپس سه سناریو مکانی برای بررسی، عوامل محیطی فوق‌الذکر بر انتشار و پخش آلودگی نفتی طراحی و اجرا شده است. نتایج مدل‌سازی نشان می‌دهد چنان چه آلودگی هنگام شروع جزر به مدت سه ساعت در مقابل پالایشگاه نفت آبادان و پیچ خسروآباد رخ دهد و دبی متوسط رودخانه s/3 m480 باشد، بدون اعمال باد، آلودگی به ترتیب پس از 124 و 5/85 ساعت به خلیج‌فارس می‌رسد.}, keywords_fa = {اروندرود,جزرومد,مدل هیدرودینامیک مایک21,پخش و انتشار آلودگی نفتی}, url = {https://www.iraneiap.ir/article_137143.html}, eprint = {https://www.iraneiap.ir/article_137143_0c36e82f22c5e39bd476f01fe3c3ada3.pdf} }