پژوهش های محیط زیست

پژوهش های محیط زیست

ارائه یک سیستم تولید چندگانه نوین با هدف کاهش آلاینده های محیط زیستی

نوع مقاله : مقاله پژوهشی

نویسندگان
دانشگاه محقق اردبیلی
10.22034/eiap.2025.237716
چکیده
در این تحقیق، برای صرفه‌جویی و استفادۀ بهینه از انرژی اولیه، تلفیق آب‌شیرین‌کن چنداثرۀ تقطیری با تراکم بخار (MED-TVC) در یک سیستم تولید همزمان توان، حرارت و سرما با استفاده از مولد بازیافت‌حرارت سه فشاره با محرک توربین گاز مورد ارزیابی ترمواکونومیکی قرار گرفته ‌است. اجزای سیستم تلفیقی عبارت‌اند از: کمپرسور، محفظۀ احتراق، توربین گاز، مولد بازیافت ‌حرارت‌سه‌فشاره، چیلر جذبی و آب‌شیرین‌کن چند اثره. بخار فشار پائین تولیدی در مولد ‌بازیافت ‌حرارت برای مصرف چیلر جذبی، بخار با فشار متوسط برای راه‌اندازی آب‌شیرین‌کن و بخار سوپر‌هیت فشار بالا برای مصارف گرمایشی به‌کار می‌رود. مدل‌سازی سیستم برای آنالیز ترمودینامیکی و ترمواکونومیکی با استفاده از نرم‌افزار Engineering Equation Solver(EES) و با درنظرگرفتن روابط موازنه‌ معادلات جرم، انرژی، اگزرژی و هزینه انجام ‌شده ‌است. نتایج مدل‌سازی نشان داد که با طرح جدید، بازده اگزرژی سیستم تا 57/5 درصد افزایش می‌یابد و به ترتیب تولید توان، گرمایش، آب شیرین و سرمایش بالاترین هزینه تولید را دارند.
کلیدواژه‌ها
موضوعات

عنوان مقاله English

Proposing a novel poly-generation unit for decreasing environmental pollution

نویسندگان English

Hadi Ghaebi
Ghader Abbaspour
Milad Fili
UMA
چکیده English

In this research, thermoeconomic analysis of a multi-effect desalination thermal vapor compression (MED-TVC) system integrated with a trigeneration system with a gas turbine prime mover is carried out. The integrated system comprises of a compressor, a combustion chamber, a gas turbine, a triple-pressure (low, medium and high pressures) heat recovery steam generator (HRSG) system, an absorption chiller cycle (ACC), and a multi-effect desalination (MED) system. Low pressure steamproduced in the HRSG is used to drive absorption chiller cycle, medium pressure is used in desalination system and high pressure superheated steam is used for heating purposes. For thermodynamic and thermoeconomic analysis of the proposed integrated system, Engineering Equation Solver (EES) is used by employing mass, energy, exergy, and cost balance equations for each component of system. The results of the modeling showed that with the new design, the exergy efficiency in the base design will increase to 57.5%. In addition, thermoeconomic analysis revealed that the net power, heating, fresh water and cooling have the highest production cost, respectively.

کلیدواژه‌ها English

Cogeneration
Gas turbine
Desalination
MED-TVC
Thermoeconomic analysis

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 09 دی 1404